5-Axis Dental Milling Machine with Six-Axis Blank Changer and Performance Monitoring Software
Increase your productivity in the lab with the Roland DWX-52DCi. Its open architecture and material versatility offers the ultimate in versatility. The six-position automatic blank changer, 15-position automatic tool changer, and other automated features enable unattended production and provide maximum 24-hour productivity. Mill a wide variety of dental restorations including crowns, copings, bridges, inlays, onlays, veneers, abutments, implant bars, direct screw-retained crowns, digital dentures, models, drill guides and splints.
The DWX-52DCi continues to work for you even after your lab is closed. Continuous milling of multiple jobs is possible thanks to the snap-in holder system of the automatic blank changer for a maximum of 6 blanks of 98.5 mm of different materials such as wax, PMMA, composite, PEEK, plaster, CoCr sintered metal and fiber-reinforced resin. An additional pin-type holder allows up to eight pin-type blocks to be clamped and milled. Furthermore, the automatic 15-fold tool changer ensures uninterrupted milling of different materials.
The new DWINDEX software logs your milling operations, allowing you to better plan, analyze and manage your lab's machine productivity and profitability.
The DWX-52DCi delivers exceptionally precise results thanks to its smooth and stable ball screw system. Even deep undercuts, milling of large bridges and complete dentures are handled with ease thanks to simultaneous rotation and swiveling of the blanks.
||Zirconia, wax, PMMA, composite, PEEK, gypsum, fiber reinforced resin, CoCR sintered metal
|Loadable workpiece shapes
||Step range: 98.5mm (3.88in) (diameter), height 10mm (0.39in)
Body range: 95mm (3.74in) (diameter), height max 45mm (1.77in)
Pin diameter 6mm
|Loadable workpiece weight
||850g or less
|Number of adapters in the housing
||XYZ axes: 6 to 1800mm/min. (0.24 to 70.9in/min.)
||Brushless DC Motor
||6000 - 30000 U/min
|Traverse angle of rotary axis (A)
|Traverse angle of the rotary axis (B)
|Number of cutters in the housing
|Shank diameter (attachable cutters)
|Length (attachable cutters)
||40 - 55mm (1.57 to 2.17in)
|Compatible compressed air
||0,02 to 0,2MPa
|Control command set
||RML-1, NC Code
||100-240V ± 10%, 50/60Hz (Overvoltage Category: II, IEC 60664-1), 2.0A
||Operating 70 dB(A), Standby 48 dB(A) or less
||880mm (w) x 660mm (d) x 600mm (h) (additional 150mm in depth required for suction tube)
||Indoor use. Altitude: up to 2000m (6562ft.), Temperature: 5 to 40 C° (41-104F°), Humidity 35 to 80% (no condensation), Environmental pollution level: 2 (as specified in IEC 60664-1). Short-term temporary overvoltage: 1440V, Long-term temporary overvoltage: 490V.
|Scope of delivery
||Power cord, USB cable, manuals, DGSHAPE software package on CD, sensor pen, automatic correction device, material holder, material rack, Pin_Tyo holder, hex wrench, wrench (for spindle), cutter holder, cutter positioner, cleaning tool, holder labels, dust extraction hoses, controller, cleaning brush …
System Requirements for the USB Connection
||Windows 10, 8.1, 7 (32-bit or 64-bit) or an upgraded computer that originally had Windows 7 or later preinstalled)
||Use the supplied USB cable