Dental Softworks DS-CAM Software
It is almost impossible to imagine any dental production without CAM software. DS-CAM sets new standards in terms of speed and user interface. You will be guided through the software from start to finish and even as a beginner you will achieve your results safely from day one. You start with work preparation, where all parameters such as machine type, material and indication are already queried. In the next step, the blank selection is already available to you. Not only do you have quick access to your existing blanks, but you can also create new blanks and ingots quickly and easily. You can place the crowns, bridges, bars, temporaries, inlays... on the blank and forward them to the milling path calculation. This is where Dental CAM really comes into its own and you are able to calculate a zirconia crown in less than 30 seconds and make it readable for the milling machine. For those who want to delve deeper into the matter, the CAM software provides freely designable milling strategies/templates. As a skilled user, you can add your own strategy with just a few clicks to address your very specific needs.
The machines listed below are supported:
If your machine is not included, please feel free to contact us.
||Organical multi 5ax
- Intel Core i7, Intel Xeon (min. 4 cores + Hyperthreading Technology)
- Windows 7 64bit or newer
- 8GB 1333MHz or more
- Nvidia, min. 2GB DDR5 memory, no guarantee for AMD graphics cards
- 100GB free hard disk space, SSD recommended for faster access times
- Network connection