| Processable materials |
Zirconia, wax, PMMA, composite, PEEK, gypsum, fiber reinforced resin, CoCR sintered metal |
| Loadable workpiece shapes |
Step range: 98.5mm (3.88in) (diameter), height 10mm (0.39in)
Body range: 95mm (3.74in) (diameter), height max 45mm (1.77in)
Pin diameter 6mm |
| Operating Speed |
XYZ axes: 6 to 1800mm/min. (0.24 to 70.9in/min.) |
| Spindle Motor |
Brushless DC motor |
| Spindle Speed |
6000 - 30000 U/min |
| Traverse angle of the rotary axis (A) |
± 360° |
| Traverse angle of the rotary axis (B) |
± 30° |
| Number of cutters in the housing |
15 |
| Shank diameter (attachable cutters) |
4mm |
| Length (attachable cutters) |
40 - 55mm (1.57 to 2.17in) |
| Compatible compressed air |
0,02 to 0,2MPa |
| Interface |
USB |
| Control command set |
RML-1, NC Code |
| Power supply |
100-240V ± 10%, 50/60Hz (Overvoltage Category: II, IEC 60664-1), 2.0A |
| Power consumption |
Approx. 200W |
| Noise Level |
Operating 70 dB(A), Standby 48 dB(A) or less |
| External dimensions |
495mm (w) x 660mm (d) x 600mm (h) (additional 150mm in depth required for suction tube) |
| Weight |
67 kg |
| Installation Environment |
Indoor use. Altitude: up to 2000m (6562ft.), Temperature: 5 to 40 C° (41-104F°), Humidity 35 to 80% (no condensation), Environmental pollution level: 2 (as specified in IEC 60664-1). Short-term temporary overvoltage: 1440V, Long-term temporary overvoltage: 490V. |
| Scope of delivery |
Power cord, USB cable, manuals, DGSHAPE software package on CD, sensor pen, automatic correction device, material holder, material rack, Pin_Tyo holder, hex wrench, wrench (for spindle), cutter holder, cutter positioner, cleaning tool, holder labels, hoses for dust extraction, controller, cleaning brush … |
